Pasteurizer. Juice pasteurizer Alfa Laval CL IP6-RM, year 1993 Capacity: 3000-4800 Lt/h. The flow is controlled by frequency convertors VLT 5008 from Danfoss. Pasteurizing temperature: up to 120 gr. C Holding time at 4000 Lt/h: 30 sec. Machine has a deaerato...
1993 | 300044768 | ALFA LAVAL
More information
Pasteurizer. Pasteurizing system for fermented products Alfa Laval Including: 1. Heat Exchangers Alfa Laval Front Clip Line, year 2002/2004, Temp. up to 120 gr.C - capacity 3000 l/h or 6000 l/h - holding time: 6 min. (holding cell is not included, info. is re...
1995 | 300045767 | ALFA LAVAL
More information
Heat-Exchanger. Complete plate Alfa Laval pasteurizer Type: C8-KSR with all warm circuit pumps and APV and TetraPak valves Capacity: 20.000 l/h Working pasteurizing temperature: 73-75 gr. C Maximum pasteurizing temperature: 120 gr. C Holding time: 4-6 min Prod...
2019 | 300045870 | ALFA LAVAL
More information
Separators and centrifuges. Alfa Lava centrifuge for fruit and vegetables Max allowed speed bowl: 4800 rpm Speed motor shaft 2032 rpm Recomended motor power 37 Kw Max density of feed: 1100 kg/m3 Max density of sediment 1400 Kg/m3 Max density of operation liquid 1100 Kg/m3 Pro...
2013 | 300045247 | ALFA LAVAL
More information
Separators and centrifuges. Decanter FOODEC 400T Bowl diameter 440 mm Bowl speed (maximim) 3800 rpm G-Force (Maximum) 3551 G Gross weight 3.200 Kg Length L= 4.749mm Width W=1.060 mm Heigth H=1.376 mm Max Solids density: 1,2 Kg/dm3 Min feed temperature: 0 ºC Max feed temperatur...
2017 | 300045151 | ALFA LAVAL
More information
Separators and centrifuges. Clarifying centrifuge Andritz Freedom CA 71 Volume of the drum: 18lt Revolutions x minute: 6.800 Liquid flow: 3.500 L/h Solid percentage: 21% Working temperature: 90 Cº Power: 15Kw Weight of the machine: 1180kg Machine has never been used ...
2017 | 300042517 | ANDRITZ
More information
Pasteurizer. Milk pasteurizer APV (original manufacture year unknown, estimated from the 90's), completely refurbished and installed in 2007 Including: 1. Plate Pasteurizer APV with associated vent pipes and armature, capacity 10.000 L/h; Max pasteurizing tempe...
| 300038165 | APV
More information
Homogenizer. Homogenizer APV Type 55-4.3P, Denmark Year 2001 Capacity 5000 l/h Maximum working pressure: 180 bar Number of stages: 2 Diameter of the pistons: 50 mm. Electrical parameters: 3 phase motor, 37 kW, 400V, 50Hz The machine was dismantled in Ju...
2001 | 300037972 | APV
More information
Homogenizer. Aseptic homogenizer APV Gaulin 15-3, OPX, year 2000 Output: 1400 l/h Max. working pressure: 200 Bar Max. working temperature: 140 gr. C Was working with coffee cream. Working voltage: 3x380/400, Frequence: 50Hz Motor: 11 kW, 1460 r/min The mach...
2000 | 300040868 | APV GAULIN
More information
Homogenizer. High pressure homogenizer Gaulin 2500 - MC 45 - 5TBS Original year: unknown Pressure: 5000 psi 2 stage In excellent working condition. ...
| 300045407 | APV GAULIN
More information
Pasteurizer. Cidersure 5500 Pasteurizer, 2022 The Cidersure is FPE’s UV Treatment Equipment specifically designed and Pre-Validated for the pasteurization of Apple Cider. The 5500 model has flow rate controls, is a rolling cabinet that stands on the floor, ha...
2022 | 300046691 | CIDERSURE
More information
Pasteurizer. Direct Heating System Flash Drum Condensor DEH Construction year 1994 TEM Name: Flash drum condensor Design Temp. 140 / 140 Design press. 3/ -1 / 15 Test press. 4,2/22,1 Net weight 550 Year built 1994 For milk, cream, liquid egg, ice ...
1994 | 300045801 | DHE
More information
Homogenizer. Homogenizer for milk FBF 7075 Capacity: 8,000 l/h Double stage Maximum working temperature: 90ºC Maximum pressure: 250 bar Working hours: 7216 Can be converted to aseptic by the manufacturer at surcharge Machine is dismantled and stored...
2014 | 300043731 | FBF
More information
Aseptic systems. UHT direct steam sterilizing System GEA Capacity : 20,000 LPH Operation capacity : 10,000 LPH, 14,000 LPH, and 18,000 LPH Homogenizer: GEA 20,000 LPH aseptic type Suitable for product: coconut water, coconut milk Included - Sterilize steam fil...
2019 | 300046099 | GEA
More information
Pasteurizer. Pasteurizer Gea Finnah 6700/077 (worked with Combibloc filling line) Program controlled, with an indirect heating system and regenerative exchange circuit Year of manufacture: 1998 Max.capacity: 7700 L/h For fruit and vegetable juices: viscosity 2...
1998 | 300046494 | GEA
More information
Homogenizer. Homogenizer Gea Niro Soavi from 2011 Model: Ariete NS3075 Max pressure: 20 MPa Capacity: 10000l/h Complete control cabinet with frequency converter....
2011 | 300046399 | GEA NIRO SOAVI
More information
Aseptic systems. UHT pasteurization line GEA TDS, year 2008 Including: 1. UHT H/M 200 GEA TDS. Complete with tube& shell heat exchanger, stainless feeding pumps, control panel and steam process valves. Max sterilizing temperature: 150 gr.C 2. GEA TDS Balance Tank....
2008 | 300046735 | GEA TDS
More information
Aseptic systems. Aseptic System Izumi Foods Machinery Manufacturing date: 2013 Capacity: 4000L/H The UHT system includes: 1. Tubular sterilizer 2. CIP system 3. Air Sterilization Unit 4. Control panel 5. Balance tank 6. Aseptic tank 2000 L Machine ava...
2013 | 300046682 | IZUMI FOOD
More information
Pasteurizer. Tubular Juice Pasteurizer KF Engineering, originally from 1994, installed in 1999 Fully renewed in 2014 (pneumatic tubes, valves, sealing changed) Capacity 7000 l/h Max temperature 129 gr. C in sterilizing mode 3 stages: heating, holding, cooling ...
1994 | 300037642 | KF ENGINEERING
More information
Homogenizer. Homogenizator Niro Soavi, original year unknown Renovated in 2010 and converted to aspetic. Originally constructed for capacity 16 000l/h. The homogenizer motor was changed from a 150kw to 90kw. As a result, its output was reduced to 8,000t/h. ...
| 300040070 | NIRO SOAVI
More information
Homogenizer. GEA Niro Soavi Ariete NS3055H homogenizer, year 2018 It homogenizes the product after sterilization at temperatures of 80ºC. With high pressure pump Includes spare parts....
2018 | 300046441 | NIRO SOAVI
More information
Separators and centrifuges. Warm milk Separator SEITAL SE 15X Without electrical cabinet ! Last full service: December 2022 Capacities: - milk skimming: 3500 l/h - milk standardinzation: 5000 l/h Bowl capacity: 9,5 l Bowl speed: 7500 rpm Self cleaning Motor power: 7,5 kW...
1989 | 300045470 | SEITAL
More information
Heat-Exchanger. Plate milk pasteurizer SPX Technology, year 2021 PHE Type: O050 EnergySaver Frame Type / Size RKS-10/6. solid ss, tie: cs, protect tube, max 330 plates Dimensions (H x W x L) mm: 2040 x 495 x 1900 Weight: 1500 kg Total Number of Plates 306 Total A...
2021 | 300046567 | SPX
More information
Homogenizer. Homogenizer Stork type 5HL-15 Two steps Capacity:10000 lt per hour Max. pressure: 250 bar The machine is dismantled and stored....
1988 | 300036135 | STORK
More information
Aseptic systems. UHT system Stork Sterideal 13000 with homogenizer Homodeal 13000 Capacity: from 5000 to 13000 l/h Min. temperature: 135 gr. C Completely overhauled in 2018: new control cabinet, HMI, PLC Siemens S7, frequency converter, valves, pumps… Stopped wor...
1991 | 300045530 | STORK
More information
Heat-Exchanger. Two tubular Heat Exchangers 1. Tubular heat exchanger Tetra Pak Steriflow from 1998. 2. Two-module tubular heat exchanger by KF Engineering GmbH Possibility to sell seperately. Price is for both heat exchangers. output 200 lph - 60.000 lph Ma...
| 300038004 | TETRA PAK
More information
Homogenizer. Homogenizer Tetra Pak ALH30, year 1994 2 stages, has 70mm pistons, max pressure 160 Bar Hydraulic unit upgrade done in 2002 Crankcase complete was changed in Feb 2010 Capacity16,500 liters per hour with the existing motor of 110kW. Can reach lower...
1994 | 300039721 | TETRA PAK
More information
Pasteurizer. Pasteurization system Tetra Therm Lacta from 2011 Capacit: 5000 l/h Pasteurizing temperature: 98 gr.C Working hours:13140 Included: - Deaerator - Homogenizer - Fruit feeder Tetra Pak The machiine is disconnected. Available immediately....
2011 | 300042083 | TETRA PAK
More information
Homogenizer. Homogenizer Tetra Pak TA S40 Capacity 15.000 l/h. Two stage homogenizer with max. working presssure 240 bar. The machine was overhauled by Tetra Pak in 2019. Was in production until Jan 2021...
1998 | 300042344 | TETRA PAK
More information
Pasteurizer. Plate pasteurizer for wine Tetra Pak Type CS-SR Three stages Production: from 20 to 80 hl x hour Pasteurization from 0 to 80 Cº - 30 seconds PLC: Siemens S7 connected with VPN to remote control Automatic Sterlization The machine will be availabl...
2005 | 300042641 | TETRA PAK
More information
Aseptic systems. Tetra Pak UHT system Tetra Aseptic Flex5 from 1996 Capacity: 4000-5000 L/h The offer includes the following mschines: - homogenizer Tetra Alex 25 from 1996 - Tubular heat exchanger Tetra Therm Aseptic Flex5 from 1996 - Valves system: SRC , CPMI, LK...
1996 | 300043358 | TETRA PAK
More information
Pasteurizer. Complete juice mixinig and pasteurizing line Tetra Pak, year 1994 Including: 1. Storage tank for concentrate –1 pc. Capacity- 4000 l 2. Mixing station - ...
1994 | 300044976 | TETRA PAK
More information
Aseptic systems. Juice pasteurizer Tetra Therm Aseptic Drink SAD 100 Year of manufacture: 2003 Product viscosity: 35.000 mPas Design temperature 15 -166 gr. C Design pressure: 0 -30 Bar With deaerator No homogenizer included. The machine is still in production...
2003 | 300046721 | TETRA PAK
More information
Aseptic systems. Juice pasteurizer Tetra Therm Aseptic Drink SAD 132000 Year of manufacture: 1999 Tubular HE Tetra Spiraflo With deaerator No homogenizer The machine is still installed but out of use ...
1999 | 300046722 | TETRA PAK
More information
Aseptic systems. Aseptic plate pasteurizer A Due Easy Therm, year 2016 Flow rate: 1.800 l/h - 6.600 l/h Suitable to heat, sterilize and cool products for aseptic filling. Product specifications: - Fruit juice and nectar (max viscosity: 50 cPs at + 25 °C) - Milk an...
2016 | 300044124 | A DUE
More information
Pasteurizer. Bactofuge sludge steriliser ACTINI Construction year 2014 With a capacity of 500 l/h Treatment : Inlet temperature 50 °C Processing temperature 120 °C Output temperature 70 °C Actually used for milk, but can be used also for juices and beer dep...
2014 | 300045012 | ACTINI
More information
Aseptic systems. APV sterilizer Year 1989 Output: 16.500 l/h Includes: - APV R52 plate + tubular exchange pasteurizer - Gaulin MC 120 homogenizer , 5 pistons, with asynchronous motor on frequency converter - Bio Inox sterile tank, year 2002 - capacity 22.460 ...
1989 | 300045803 | APV
More information
Homogenizer. Homogenizer SPX -APV Gaulin G37-3.0 B Year: 2015 Capacity: 3000 l/h Number of stages: two Pressure on suc. 3-10 bar Max. hom. Pressure: 210 bar Outlet: 5 bar Dimensions: L: 1551 x W: 1285 x H: 1685 mm. Weight: 2200 kg Product: fruit puree (fru...
2015 | 300044730 | APV-SPX
More information
Separators and centrifuges. Mobile sludge dewatering system including the lorry swap body Construction year 2016 For the separation of flotation sludge and excess sludge max. 30 m3 / h including sludge pump NETZSCH, Polymer pumps NETZSCH and SEEPEX Flowmeter Turbidimeter 79...
2019 | 300046540 | FLOTTWEG
More information
Aseptic systems. Sterilizer GEA from 1992 Capacity 2000 l/h Sterizaling temp. 142º Includes homogenisator APV Gaulin The head is single-stage Pressure 180 bar. Available immediately!...
1992 | 300045268 | GEA
More information
Homogenizer. Homogenizer GEA NIro Soavi, model Ariete NS3030, year 2016 0 hours worked. Two stages For fruit nectars and juices Maximum pulp size: 500 μm Working temperature: 90°C Working pressure: 220 Bar Max. RPM : 150 Maximum back pressure: 5 bar Minimum su...
2016 | 300044125 | NIRO SOAVI
More information
Aseptic systems. UHT Universal Machine Stephan UM130 for soft cream cheese Capacity: 500 kg/h Temperature: 120 C With creaming tank In perfect running condition...
2010 | 300045917 | STEPHAN MACHINERY GMBH
More information
Aseptic systems. Complete Stephan UHT Plant for soft cheese (Cream/ cheese) Temperature: 143 C Capacity 2000 kg/h In perfect working condition ...
2010 | 300045918 | STEPHAN MACHINERY GMBH
More information
Aseptic systems. Stork S13 sterilizer, year 1997 Capacity: 13,000 L/h Homogenizer Stork S13 Prominox sterile tank 40224 L, year 2004 Capacity: 40,224 L Exterior materials: AISI 304 Internal materials: AISI 316 L Max. permissible pressure: -1 to 3.5 bar Test pressu...
1997 | 300045766 | STORK
More information
Aseptic systems. STORK S20 sterilizer Year: 1989 Capacity: 16,500 l/h Homogenizer Stork S20 Goavec sterile tank, year 2004 Capacity: 34,384 L Exterior / interior materials: AISI 304 / AISI 316 L Max. permissible pressure: 4.4 bar Test pressure: 7 bar Type : 3 fe...
1989 | 300045804 | STORK
More information
Aseptic systems. Tetra Pak TAflex Sterilizer S15, year 2002 Flow rate : 15.000 L/h Goavec sterile tank, year 2002 Capacity: 24,870 L Outer / internal materials: AISI 304 / AISI 316 L Max. permissible pressure: 4 bar Test pressure: 8 bars Type : 3 feet on load cel...
2002 | 300045765 | TETRA PAK
More information