HITEMA - PS10.09
Air dryer. Air dryer HITEMA model PS10.09 Year 2010 Max pressure Freon side 28 bar Max. pressure air side 12 bar Refrigerant R407C 2,7 kg...
2010 | 300046532 | HITEMA
Air dryer. Air dryer HITEMA model PS10.09 Year 2010 Max pressure Freon side 28 bar Max. pressure air side 12 bar Refrigerant R407C 2,7 kg...
2010 | 300046532 | HITEMA
Co-extruder. ...
2012 | 300043381 | GREINER
Conveyor. Erimec TRC50A conveyor, year 2018 Speed: 15 meters/minute 3 m length motorized with motor : 3 pieces 3 m length motorized without motor : 3 pieces 3 m free length : 3 pieces 1 m free length : 1 piece 2 m motorized length with motor : 1 piece 2 m fre...
2018 | 300045912 | ERIMEC
Conveyor. Conveyors Krones Synco for cans, glass or PET bottles (50m), year 2015 Never been used Available immediately ...
2015 | 300046357 | KRONES
Conveyor. Bottle take out device for a Nissei ASB 12M The conveyor has only a few thousand of hours Made in Japan Production: 400 bph Driving Method: Vertical Movement, Electrical Slider, Forward Backward Movement:Air Cylinder The machine has been dismantlle...
2021 | 300044015 | NISSEI ASB
Conveyor. 50 meters of Perfect condition AIR conveyor by Sidel / Simonazzi from 2006...
2006 | 300039158 | SIDEL
Corrugator for pipes and tubes. CAPUZZI Corrugator model FC 25/72 including 3 sets of 20-22-25 mm molds...
1995 | 300043807 | CAPUZZI
Corrugator for pipes and tubes. Fränkische FMC 20–90V corrugator Can produce up to 20mm pipe with vacuum and up to 25 mm pipe with inner air Included molds: one set DIN 13.5 = EN 20 and one set DIN 16...
2006 | 300044034 | FRÄNKISCHE
Die head for tubes. Three layers die head for production of co-extruded PE100 RC pipes Complete with heaters and spare heaters Working hours: 8448 h SDR 33; 26; 21; 17; 13.6; 11; 9; 7.4 Outside layer: 10-20% Middle layer: 60-80% Inside layer: 10-20% Tolerance of the lay...
2020 | 300044211 | LIANSU
Extrusion line for corrugated pipes. Moulds and equipment only for 63 mm diameter available EXTRUSION LINE: No. 1 Master single-screw extruder Model: PROTON 60-28 G Year: 1997 Complete with colour dosing unit (Engine plast mod DMX 25/1+1) No. 1 Slave single-screw extruder Model: UNI...
1995 | 300027641 | CORMA
Extrusion line for corrugated pipes. Complete line for DWPE corrugated pipes extrusion up to 1000 mm (ID tooling) - Master extruder SJ – 120*33 year 2006 output 800 kg/h (working hours 3157) - Slave extruder SJ – 90*33 year 2006 output 500 kg/h (working hours 3426) - Die head - Corruga...
2007 | 300039883 | DALIAN SUNLIGHT
Extrusion line for corrugated pipes. Co extruder for color stripe...
2006 | 300045546 | DROSSBACH
Extrusion line for corrugated pipes. Coextruder Tongli for color stripe Inoex gravimetric...
2006 | 300045548 | DROSSBACH
Extrusion line for corrugated pipes. Co extruder for color stripe...
2011 | 300045545 | DROSSBACH
Extrusion line for corrugated pipes. ...
2017 | 300042651 | JWELL
Extrusion line for corrugated pipes. Co extruder for color stripe...
2012 | 300045547 | JWELL
Extrusion line for corrugated pipes. Extrusion line for corrugated tubes/pipes in PE - Single screw extruder OEMER model CM70/30 motor 72 kW - Corrugator OLMAS C2/90 S - Coiler OLMAS - Chiller COREMA JA/V 600 No moulds included...
2002 | 300043863 | OLMAS
Extrusion line for corrugated pipes. Extrusion line for corrugated pipes - single screw extruder PAGANI 45/20MD year 1996 - Output 30 kg/h .- Running hours 2000 - Die head OLMAS DN15-DN54 year 1996 - Corrugator OLMAS C22R year 2002 (NO vaccum system) - Mould blocks: 15/21/28/38/54 mm...
2002 | 300044426 | OLMAS
Extrusion line for corrugated pipes. Complete used Corrugator extrusion line Tip: UNICOR UC 1000/9 iV Year of building: 2000, for corrugated PP / PE double wall pipes up to max. 1000 mm OD, 230/400 V, 50 Hz. The production line is capable of producing corrugated pipes DN/ID 300, 40...
2000 | 300033840 | UNICOR
Extrusion line for corrugated pipes. Extrusion line for corrugated DWPE pipe (from 300 mm ID up to 630 mm ID) Scope of delivery: 1. no. 2 sets of RM vacuum loading system 2. no. 1 set TSM Dosing system with 4 components gravimetric system for both master and slave extruder 3. no. 1 H...
1999 | 300045034 | UNICOR
Extrusion line for corrugated pipes. Double wall corrugated pipe extrusion line DWPE - Main Extruder Cincinnati Extrusion Proton 60-30G year 2001 - Secondary extruder Cincinnati Extrusion Proton 45-30G year 2001 - Corrugator Unicor UC-250 year 2001 + vacuum pump - Unicor cooling bath +...
2002 | 300046495 | UNICOR
Extrusion line for corrugated pipes. Master extruder Manufacturer: Cincinnati Extrusion GMBH Type: PROTON 75/30G Year: 2001 Note: complete with gravimetric output control and N° 1 dosing feeder Plasticolor 2200. Slave extruder Manufacturer: Cincinnati Extrusion GMBH Type: PROTON 60/30G...
2001 | 300046535 | UNICOR
Extrusion line for drip irrigation. Complete line for the production of drip irrigation flat tape - labyrinth type Single screw extruder Tower with strip forming tool Vacuum tank Cooling tank Haull off Winder double station The line is high speed and has a diameter adjustment by laser ...
2011 | 300041446 | EUROTECNO
Extrusion line for drip irrigation. Extrusion line for drip irrigation with drippers insertion device (60 drippers/min) Extruder diam. 60 mm Feeding equipment Die head 90º for diameter 16 and 20mm Calibrators for diameter 16 and 20mm Hydrostatic tank of 3 meters Cooling ta...
1995 | 300025416 | PERIPLAST
Extrusion line for drip irrigation. Flat drip extrusion line Material: PE Main extruder: KRAUSS MAFFEI KME 60-36 (working hours: 6 590, August 2023) Second extruder: WINDSOR LX-25 (2014) Control system: T.H.E. MACHINES (2013) Gravimetric system: WERNER KOCH MCma - 4T (2013) Feeder: ...
2011 | 300046252 | THE MACHINES
Extrusion line for drip irrigation. Complete line for PE drip irrigation pipes with automatic dripper insertion. Brand TRIMEC. Year 1994. A.-Extruder TRIMEC TM 75/30D. Engine 57.5 kw. Loader on hopper. B.-Head for tube. C.-Dripper loader system, with accumulator tank and TRIMEC dripper...
1994 | 300041397 | TRIMEC
Extrusion line for PE/PP pipes. Complete line for PEX-AL-PEX tubes (Ø 16-32) SCOPE OF DELIVERY 1.Main extruder Cincinnati Proton 45-30G-65-320-1100-UT year 2005 2. Coextruder Cincinnati CE-30 year 2005 3. Vacuum Tank Cincinnati Vacon 63T/,8/3K year 2005 4. Puller Cincinnati Tract...
2005 | 300044939 | CINCINNATI EXTRUSION
Extrusion line for PE/PP pipes. Complete extrusion line CINCINNATI PROTON 120-30G-310-112-1100-UT for the production of HDPE pipes from 200 mm up to 630 mm (OD) Tools included: 225, 315, 355, 400, 450, 500, 560, 630 Tilting table....
2002 | 300046528 | CINCINNATI EXTRUSION
Extrusion line for PE/PP pipes. Extrusion line for pipes/profiles in PE/PP Single screw extruder EXTRUDEX EDN 50/30 motor 50 kW year 2000 Vacuum tank Industrie Generali V63T 2,2 m power 3 kW year 2000 Cooling tank Industrie Generali N63T 6 m year 2000 Puller Industrie Generali T....
2000 | 300046600 | EXTRUDEX
Extrusion line for PE/PP pipes. SECOND EXTRUDER FOR FOR PROTECTIVE LAYER (PP): Manufacturer: Krauss Maffei Model: KME 45-30 Year: 2015 Screw diameter (mm): 45 Screw L/D ratio: 30 Output capacity (kg/h): 300 Main drive power (kW): 56 Screen changer: Yes Running hours: 0 СO-EXTRUDE...
2015 | 300046673 | KRAUSS MAFFEI
Extrusion line for PE/PP pipes. Extrusion line for 3-layer PE/PP sewage pipes from 75 to 160 mm Type: 75 - 160 Production: 1990 / 2004 -Extruder for intermediate layer Reifenhäuser 65 Kw, Model : RH 551-1-70-25, Year 1990 New alternating current mo...
1990 | 300046169 | REIFENHAUSER
Extrusion line for PE/PP pipes. Complete line Setup in 4 x 40' double ended shipping containers for on-site extrusion. The line has been refurbished during container setup 2 x INOEX Savomat Gravimetics material input control system Single screw extruder KS machinery - SJ90/33 wi...
2012 | 300046283 | SICA
Extrusion line for pipes and tubes (unclassified). Complete plant for cable production Extrusion line 60 – Bimar (1989) Extrusion line 100 – Bimar (1990) Air-printing line (1983) Bow stranding machine (1990) Small bow stranding machine (1990) 4 coilers Oven Machines are working with good conditio...
1990 | 300046014 | BIMAR
Extrusion line for pipes and tubes (unclassified). Winding pipe Eagle Machinery PSW 3000 HDPE/PP Large-diameter production line The system consists of two extrusion lines: 1) Extruder EAS 90/38 Screw Diameter: 90 mm; L/D 38 Output Capacity: 850 kg/h Co extruder EAS 50/33 Screw Diameter: 50 mm; L/D 33...
2021 | 300045396 | EAGLE MACHINERY TECHNOLOGY
Extrusion line for pipes and tubes (unclassified). Complete used extrusion line for the production of 5 layer PERT pipes -left hand version item 50.1) Extrusion. consists of a main extruder EXTRUDEX for the PERT inner layer and 4 additional secondary extruders for adhesive, EVOH barrier layer and PE...
2001 | 300044591 | EXTRUDEX
Extrusion line for pipes and tubes (unclassified). Complete used multi-layer pipe (PE-AL-PE) extrusion line from year 2010 suitable for pipes from 10 - 32 mm Including tools for diameter 16mm Technical Data: Water connection 2“ / consumption approx. 10m³/h Air consumtion approx. 20m³/h Conn...
2010 | 300045734 | MAINTOOLS
Extrusion line for pipes and tubes (unclassified). Spiral pipes extrusion line Material: PE Year: 2007...
2007 | 300044215 | TOP INDUSTRY
Extrusion line for PVC pipes. Complete line AMUT for the production of flexible pipes/hoses 1 EXTRUDER AMUT single screw EA 60L/28D Year 2005 Die-head MAX 70 mm (working with 65 mm) Type MOLCE Motor15KW AC Heating power 12 KW ...
2005 | 300038319 | AMUT
Extrusion line for PVC pipes. Extrusion line for PVC flexible pipes Includes: Automatic Winder Chinese brand from 10 up to 40 mm year 2012 Tooling 5 sets of dies and cores. 1. Die 25 mm - Core 20 mm 2. Die 24 mm - Core 20 mm 3. Die 16 mm - Core 12 mm 4. Die 12 mm for gas - Co...
2012 | 300042226 | BANDERA
Extrusion line for PVC pipes. Complete line for PVC flexible tubes Dies and Cores are available from 19mm to 50mm. (3/4 inch to 2 inch) Parallel Twin Screw extruder. Bandera 2B 66. LD ratio 1 : 28 Die Head RTS 30 Dies and cores sets : 9 sets From 3/4 inch to 2 inch. Spare pa...
2006 | 300044931 | BANDERA
Extrusion line for PVC pipes. Extrusion line for medical PVC tube year 2002 - Single screw extruder MT 50 mm 28D (meccanica trecatese) - Calibration tank - Conveyor - Cutting unit - Laser thickness control - Die head - Tooling for PVC tube extrusion ID 8 mm OD 12 mm (400 linear...
2002 | 300039315 | MT
Extrusion line for PVC pipes. Complete PVC- pipe line for pressure and sewer pipes with all tools 63 up to 200 mm The line is at the moment assembled in a factory, but not in use. The capacity of the line is approx. 500-600 kgs per hour. Twin screw Extruder Manufacturer: Rollep...
1992 | 300045220 | ROLLEPAAL
Haul off for pipes and tubes. ...
1987 | 300046183 | KRAUSS MAFFEI
Haul off for pipes and tubes. ...
2016 | 300045439 | SICA
Haul off for pipes and tubes. ...
1996 | 300046180 | SICA
Haul off for pipes and tubes. ...
1989 | 300046182 | SICA
Heating and cooling unit for moulds and dies. Accuchiller Water-Cooled Portable Chiller Model - NQW08 Nominal Cooling Capacity - 8 ton at 50°F LWT Voltage - 460/3/60Hz Tank/Pump Options - Tank & Pump Included Pump Size - 1.5 HP Pump Rotary Non-Fused Disconnect Switch - Rotary Non-Fused Disconne...
2019 | 300046576 | THERMAL CARE
Marking equipment. Inlet height 1240.00 mm Inlet direction right- left Profile height adjustment 5,0-50,00mm Engraved roller/diameter 228.60 mm Rubber-coated roller/diameter 229.40 mm Counter pressure + roller/diameter 228.60 mm Engraved roller/length 175.00 mm Rubbe...
2002 | 300045166 | UNGRICHT
Melt pump. Melt pump this equipment consists of 3 components, the body, drive system and plc control. - Codes: MAQEBENGBODY - GEAR PUMP - BODY MAQEBENGDRIVEN- GEAR PUMP - DRIVEN SYSTEM MAQEBENGPLC- GEAR PUMP - PLC CONTROLLER - The set was purchased in October...
2021 | 300046438 | BATTE
Pipe belling and socketing machine. Mergen automatic socketing machine Min. product length 150 mm Max. product length 4 m Automatic pipe feeding system Double socketing unit Pneumatic pipe transffering system Pneumatic socketing unit High preassure production unit (buster) Special hea...
2015 | 300042372 | MERGEN
Pipe belling and socketing machine. 2X PIPE BELLING MACHINE (PRICE PER MACHINE) - Model: BA/CA/H/1T 100-500 (BLUE) - Date: 1997 - Power supply: 380V - 50Hz - Absorption: 50A - CE Marking: Present (therefore valid also for the European market) - Controls: PLC and operator panel + rem...
1997 | 300043599 | SICA
Pipe belling and socketing machine. Tooling 68 mm...
2018 | 300043922 | SICA
Pipe belling and socketing machine. Tooling: 250-315-400 mm...
1996 | 300044419 | SICA
Pipe belling and socketing machine. SICA belling machine: BA CA 1T 100-500 year: 1983 Oven tooling - diameters: 160; 200; 250; 315; 400; 500. Belling tooling No. 1 complete mould diameter 315x5 for smooth sockets; no. 1 complete mould diameter 315xSN2 for sockets with O-ring seat; n...
1983 | 300045451 | SICA
Pipe belling and socketing machine. no tooling...
1986 | 300046185 | SICA
Pipe perforator. Main technical parameters : Pipes sizes from 90 mm to 630 mm diameter (630 SDR 17 maximum wall thickness), up to 6 meters long. Two heads with 24 off 3mm thick saw blades (20 off 5mm thick blades can be fitted). Can be used toget...
2002 | 300042911 | MAPEX
Saw for tubes. Maximum pipe wall thickness 2 mm Measurement of speed and length via encoder Clamps: 17,5 mm; 20 mm; 33,5 mm Renewed in 2020: pneumatics, hydraulics, cutting head Spare parts: drive belt...
2002 | 300045440 | IPM
Saw for tubes. Minimum cutting length: 250 mm Clamps: 32-40-50-75-110 mm...
2016 | 300042373 | MERGEN
Saw for tubes. Swarfless cutting of PO pipes by means of rotating cutting knife Electric cutter carriage by means of AC motor Stroke: 1500mm Speed of cutting unit 0,1 – 4 m/min Knife movements hydraulically Central clamping system universal type, clamp movement...
2018 | 300046825 | SAREM MAKINA
Saw for tubes. ...
1996 | 300046179 | SICA
Screen changer for extruders. Filter diameter 700 mm Filter laser Micron: from 80 to 300 mesh: from 180 to 50 Punched filter from 400 to 2000 from 40 to 10 Metallic mesh filter from 80 to 2000 from 180 to 10 Filtered materials PP / LDPE /LLDPE / HDPE / PS / EPS / X...
2022 | 300045507 | BREAK MACHINERY
Screen changer for extruders. Automatic Band Melt-Filter Screen area capacity: 260 x 220 mm Accumulator: 7 Litre Electric power input: 57 KW Max. Pressure: 200 bar Operating temperature: max. 270°C Cooling water: Pressure: 3 — 4 bar Temperature: max. 15°C Cooling water qu...
2018 | 300046238 | BRITAS
Screen changer for extruders. Heating capacity 36500Watt Max. pressure 200 bar Heating zones 5 Weight 3200 kg Overhauled: March 2023 New control panel for operation of the screen changer Accessories: A melt pump is also there along with connecting flanges between screen changer...
2003 | 300046362 | GNEUSS
Screen changer for extruders. Leistritz 4/140 - Double piston screen changer for continuous operation. Capacity: 800-1000 kg/h 4 screens - two each piston. Diameter each screen - 140mm (In process are always two, total 280mm) Hydraulic-aggregate 1,5 kW Heater 16 kW...
2003 | 300046191 | LEISTRITZ
Screen changer for extruders. 2x Screen changer Maag FSC-160 for sale (price per unit): Functional, in good condition last time used with EUP600-EWT350 Hydraulic unit for the screen changer included (maintenance recommended) Accessories: (Not included in the offer, ask for the p...
2009 | 300046473 | MAAG
Screen changer for extruders. Nordson Standalone continuous melt-filter (for recycling extruder, similar to Laser Filter): can be put additionally to extruder filter at the end as second filter Working hours: < 9600 hours Currently in operation as a 2nd Filter on an ARTEC extrude...
2021 | 300045578 | NORDSON
Screen changer for extruders. Used on a twin screw KMD125 Krauss Maffei Completely refurbished in 2015 (Filter unit, chrome, transducers etc) Few working hours....
1998 | 300043414 | PRT
Screen changer for extruders. Technical data: Sieve dimension 240 x 142 mm Sieve area 2x 341 cm² Throughput up to 2,000 kg/h depending on customer application Materials e.g. polyolefins Minor defects are not excluded. Hydraulic unit and control system have not been checked. Pro...
2005 | 300045387 | TRENDELKAMP
Single-screw extruder for PE/PP. ...
1996 | 300046639 | BATTENFELD
Single-screw extruder for PE/PP. Working hours 56.020 Motor DC...
1998 | 300046515 | CINCINNATI EXTRUSION
Single-screw extruder for PE/PP. ...
1998 | 300041491 | INDUSTRIE GENERALI
Single-screw extruder for PE/PP. Macchi screw Screen changer...
1997 | 300042559 | MACCHI
Single-screw extruder for PE/PP. Motor DC...
1999 | 300046504 | REIFENHAUSER
Single-screw extruder for PE/PP. ...
1996 | 300046586 | REIFENHAUSER
Single-screw extruder for PE/PP. Extruder Theysohn single screw Material PE Screw and barrel year 2020; less than 3000 hours working hours...
1996 | 300045991 | THEYSOHN
Single-screw extruder for PE/PP. Working hours: 58 600 Material PE/PP Main drive power: 186 kW Motor DC...
1997 | 300046427 | WEBER
Single-screw extruder for PVC. ...
1999 | 300044597 | BANDERA
Single-screw extruder for PVC. Extrudex ED 50 GL Material: PVC Total working hours: 46,000 2010: they changed the 33kw DC motor and replaced it with an 11kw AC motor and a frequency converter. 2016: they changed the screw and barrel (Extrudex) With the new screw and barrel 11 000...
1990 | 300043950 | EXTRUDEX
Single-screw extruder for PVC. Hopper not available for sale...
1998 | 300046564 | FRIUL FILIERE
Single-screw extruder for PVC. Extruder equipped with an extrusion screw suitable for processing SIS rubber has the following features: - Model 120 L/D=25 - Two-speed reduction unit: Speed A 0-54.6 RPM Speed B 0-127 RPM - Wear-resistant cylinder in Hv 1000 - Heating power 43 KW - ...
2010 | 300046266 | MT
Single-screw extruder for PVC. ...
1998 | 300046824 | TPM
Twin-screw extruder for PVC. Conical screws diameter 50 - 104.6 Screw length 1000 Motor power 29.6 kW Cylinder zones 4 Degassing Force feeding Working hours 54910...
2004 | 300046512 | CINCINNATI EXTRUSION
Twin-screw extruder for PVC. Motor power 68 kW...
1998 | 300046621 | CINCINNATI EXTRUSION
Twin-screw extruder for PVC. Motor power 15,4 kW Forced feeding...
2002 | 300046622 | CINCINNATI EXTRUSION
Twin-screw extruder for PVC. ...
1990 | 300046297 | CINCINNATI MILACRON
Twin-screw extruder for PVC. ...
2003 | 300043081 | FRIUL FILIERE
Twin-screw extruder for PVC. Output capacity: 230-250 kg/h Main drive power: 60,4 kW DC motor...
2000 | 300044029 | KRAUSS MAFFEI
Twin-screw extruder for PVC. Working hours: 24821,23...
1994 | 300034887 | TRIMEC
Twin-screw extruder for PVC. engine D.C. 23 kW -the temperature zone on the cylinder-6 zone - temperature zones in tool -4 zone 36 000 working hours...
2000 | 300037850 | WIRKBAU
Winder for flexibles tubes and profiles. Pipe material: HDPE Pipe type: smooth Pipe diameter: Ø50 - Ø110 Winder type: double The coil is secured MANUALLY by a strap machine using plastic tape Speed min/max (m/min): 15 (can be adjusted) Number of arms: 6 A: 350/1000 mm B: 600 mm D: In...
2019 | 300043258 | HF HAYTEK
Winder for flexibles tubes and profiles. Double winder LUNARDON 5-2700 for PE pipes in the range of Ø 63 - 125 mm...
2000 | 300045988 | LUNARDON
Winder for flexibles tubes and profiles. included two tube guides for Ø16 and Ø20 (picture attached)...
2013 | 300046638 | MAZZONI
Winder for flexibles tubes and profiles. Automatic Coiler TURBO 800 F for PVC-PE PP corrugated flexible pipes with external diameter from 16 to 32 mm and PE smooth pipes with external diameter from 16 to 20 mm. The machine is equipped with automatic pipe guiding, cutting and packaging devic...
2012 | 300046867 | MAZZONI
Co-extruder. Koch feeder included output: 15-20kg/h aprox....
1997 | 300045559 | EXTRUDEX
Conveyor. AmbaFlex Spiralveyor SV accumulating conveyor, year 2013 Output : 50 packs/min It ran on a 1L brick line, but it can also be used for bottle packs Entry height : 750 mm Exit height : 4000 mm Available immediately! ...
2013 | 300045670 | AMBAFLEX
Conveyor. AmbaFlex SV-400-1300 spiral conveyor, year 2004 Output: 60 packs/min It ran on a 1L HDPE bottle line, and it can also be used for brick packs Infeed height : 730 mm Outfeed height : 3300 mm Available immediatley! ...
2004 | 300045671 | AMBAFLEX
Die head for tubes. Three layer die-head for production of PVC foam core pipes. Complete with heaters. Year of production : 2018 Dimensions: 110; 125; 160; 200 mm SDR: 41; 34 Integrated feed block – SPYDER tecnhology for foam core 3 layer pipes New chrome coating...
2018 | 300045641 | BATTENFELD-CINCINNATI
Die head for tubes. Includes frame with wheels Pin sizes: 50-75-110 mm Males N. 2 x diam 50 – N. 2 x diam 75 – N 2 x diam 110 Adapter for 4 stripes...
| 300041781 | HOME MADE
Extrusion line for corrugated pipes. Siemens control screen Co-extruder Tongli for colour stripe Marking unit: Domino One set of moulds for the diameters 160, 200, 300, 400, and 500 mm Two sets of calibrators for Ø 160 mm, Ø 200 mm, Ø 300 mm, Ø 400 mm, Ø 500 mm....
2007 | 300045270 | JWELL
Extrusion line for corrugated pipes. 2x UNICOR die-heads included: NW-140 (1996) & NW-160 (2000)...
1997 | 300045845 | UNICOR
Extrusion line for PE/PP pipes. Maximum diameter 200 mm , minimum diameter 20 mm 1. Bausano Single screw SD 70/30 extruder year 2011 2. Coextruder Esmos PSH 25 screw diameter 25 L/D 25 year 2010 3. Extrusion head Bankov GTI 160 4. 2x Bausano calibrating tanks BT160 6MB year 2011 ...
2011 | 300045522 | BAUSANO
Extrusion line for PE/PP pipes. Complete extrusion line CINCINNATI PROTON 120-30G-310-112-1650-UT for the production of HDPE pipes from 400 mm up to 1200 mm (OD) Tools included: 400,450,500,560,630,710,800,900,1000,1200 Tilting table (12 m )....
2004 | 300039033 | CINCINNATI EXTRUSION
Extrusion line for PVC pipes. Complete line for PVC flexible tubes Tooling included: 16- 20-25-32 mm 1. Bandera diameter 45 two-speed extruder with 7.5 kW inverter motor Control cabinet with new Gefran instruments screw and cylinder 80% 4x heating zones 2x head zones 2. coo...
1975 | 300044940 | BANDERA
Extrusion line for PVC pipes. Extrusion line for double PVC tube production Twin screw extruder + vacuum and 2 x water spray tanks + SICA puller/saw combination + tooling (die head double exit + tooling from 20 up to 50 mm)...
2003 | 300043451 | BAUSANO
Extrusion line for PVC pipes. Extrusion line for PVC pipes Tooling included: 200- 250-315-400 mm Extruder Cincinnati C.156/88; year 1982; refurbished in 2020 (screw, barrel, heaters, thermo regulators) Die head: JWELL; model 400; year 2017 Calibration tank: JWELL,model 400; year ...
1982 | 300045045 | CINCINNATI EXTRUSION
Haul off for pipes and tubes. Available 2 units (price per machine)...
2007 | 300045521 | CINCINNATI EXTRUSION
Haul off for pipes and tubes. The machine was reconditioned in 1998; also refurbished in year 2009...
1996 | 300044772 | GRAEWE
Melt pump. Melt pump MAAG Maax 7 General application information application area: Thermoplastics application medium: HDPE: High Density Polyethelene density: 0.75 kg/l permissible materials: No limitations (all materials are allowed) vapor pressure: unknown a...
1995 | 300046249 | MAAG
Mould and die cleaning equipment. Pisko PC96 PET preform neck crystallizer machine, year 2014 Output: 12 000 preforms/hour Working hours: 27000 hours Configuration: PCO 1810 neck finish Includes following auxiliaries: - Preform Feeding System - Unscrambler - Temperature Control...
2014 | 300040281 | PISKO
Pipe belling and socketing machine. SEMIAUTOMATIC BELLING MACHINE FOR O-RING SOCKET: COMPLETE WITH MOULDS FOR O-RING SOCKET : - D.40-50-63-75-100 FOR PIPES THICKNESS.3,2mm - D.110-125-200 FOR PIPES THICKNESS. SN4 - D.160-250 FOR PIPES WITH THICKNESS SN2 IN ADDITION, THE FOLLOWIN...
2003 | 300042801 | IPM
Pipe belling and socketing machine. Tooling 80 mm...
2009 | 300045691 | SICA
Saw for tubes. Travel length – 1200 mm Max. Pipe thickness – 20 mm Cutter motor power – 2,2 kW Dust collect motor – 3 kW Control type – Inverter AC Cutter type – saw blade/chamfering Saw blade – diamond coated Center height – 1050 mm (+/- 50 mm) Control system – P...
2018 | 300044775 | HMG EXTRUSIONS
Saw for tubes. Cutting saw SICA:TRS 100-500 Year: 1993 Clamps for pipe diam: 315; 400; 500;...
1993 | 300045455 | SICA
Saw for tubes. no clamps...
1989 | 300046184 | SICA
Saw for tubes. ...
1999 | 300046547 | SICA
Screen changer for extruders. Leistritz 4/140 - Double piston screen changer for continuous operation Year: 2003 Refurbished: 2020 Capacity: 800-1000 kg/h 4 screens - two each piston. Diameter each screen - 140mm (In process are always two, total 280mm) Hydraulic-aggregate 1,5 ...
2003 | 300044623 | LEISTRITZ
Single-screw extruder for PE/PP. Installed power 187 kW Working Hours 10782...
2007 | 300046143 | CINCINNATI EXTRUSION
Single-screw extruder for PE/PP. ...
1998 | 300044806 | FREESIA
Single-screw extruder for PVC. Screw for rigid PVC Motor DC Sicme 17 Kw Electrical cabinet 4 zones...
1989 | 300043848 | FRIUL FILIERE
Single-screw extruder for PVC. Motor DC With PLC Screw and cylinder regenerated...
1999 | 300043815 | LARIO MACHINERY
Twin-screw extruder for PVC. TWIN SCREW EXTRUDER AMUT BA 92 YEAR 1997 COMPLETELY OVERHAULED (NEW SCREWS+CYLINDER+ CONVEYOR. COMPLETE OVERHAUL OF GEARBOX + GEAR GROUP. ALL WORK DONE AT AMUT) DC motor 59,5 kW...
1997 | 300045785 | AMUT
Twin-screw extruder for PVC. Never used in production...
2015 | 300044158 | BAUSANO
Twin-screw extruder for PVC. 1 / twin screw extruder METALCHEM 2T13 / 6M - Screw diameter 65.0 mm - number of heating zones on the screw 4 - width L / D Screw: 65/127 - degassing - output: about 150 kg / h - raw material PVC -Hours in use 5176 hours -State funct...
1996 | 300041242 | METALCHEM
Winder for flexibles tubes and profiles. Pipe material: PE Pipe diameter: Ø16 - Ø50 mm Winder type: double Speed max: 30 m/min Number of arms: 6 Inner diameter min/max: 350 -700 mm Outside diameter max: 1520 mm...
2017 | 300045131 | HF HAYTEK
Winder for flexibles tubes and profiles. ...
2001 | 300045685 | TAMEN